Rulon® 1410 is a gold material with excellent elongation and tensile strength suitable for flip seal and other flexible sealing applications .Coupled with low frictional characteristics, it offers the added benefit of energy savings and/or increased sealing efficiency.
This material is also resistant to most harsh chemicals. It is also compatible with many commercially available lubricants for additional reduction in torque.
It can also be used as a liner material for substrates requiring any of the above characteristics.
Typical Product And Application Description
Products Applications | |
• Automatically molded bearings & components | • AC compressors |
• Sleeve, flanged and thrust bearings | • Transmissions |
• Piston rings & flip seals | • Air compressors |
• Stamped and formed seals | • Appliances |
• Extruded shapes | • Automotive |
• Machined parts | • Linear slides |
• Molded shapes | • Fluid transfer systems |
• Vacuum pumps | |
• Valves |
Design Criteria RULON® 1410
Temperature - Typical Range ˚F (˚C) | -400/+550 (-240/+288) |
Maximum PV (continuous)(MPa•m/s) | 7,500 (0.26)* |
Maximum P - psi (static)(MPa) | 750 (5.2)* |
Maximum V -SFM (no load)(m/s) | 400 (2)* |
Shaft Hardness - Minimum | Rb25 |
Shaft finish recommended Ra µin(µm) | 8 - 16 (0.2-0.4)* |
Shaft Material | Stainless to Hardened Steel & cast iron |
Engineering Information | |
Friction - static & dynamic | 0.10 - 0.20 |
Flammability ASTM D635 | Non-Flammable |
Chemical Resistance | Data Available |
Linear Coefficient of 78˚ to 500˚F Thermal Expansion (26˚ to 260˚C) x 10 -5 in/in °F (x 10 -5 m/m °C) | Length 8.6 (15.4)* |
Physical Data | |
Elongation ASTM D4894 | 2.1 |
Tensile Strength ASTM D64894 (MPa) | 2150 psi (14.8)* |
Specific Gravity ASTM D792 | 2.2 |